Female rebar couplers – HRC420

Packages from 35.002,000.00

To be used with HRC410 male couplers.

Ultimate capacity: transfers the full actual strength and strain of the rebar. 

Certified acc. ISO 15835 for category B, F and S

Fulfil European national requirements and specifications: Environmental Product Declaration (EPD)

Coarse taper threads for easy and fast installation.

Rebar B500B: ReH = 500 MPa; Rm/ReH ≥ 1,08; Agt, min = 5 %

Description

HRC420 is the female part of the HRC400 ultimate rebar coupler system, combining high capacity, robust design allowing for easy and fast installation at site.

The high capacity allows for the full transfer of the real strength of the reinforcement (both stress and strain), regardless of the actual strength of the rebar heat. (No reduction in the ductility of the reinforcing steel.)

Fast and easy installation: The robust, coarse taper threads of HRC400 are designed to withstand rough site conditions. Only a few turns are needed to fully-assemble this self-aligning connection. No torque required for HRC410/420 standard coupler.

HRC420 is certified acc. ISO 15835 (incl. fatigue and seismic performance) and fulfils European national requirements and specifications (e.g. for The Netherlands, Germany, Denmark, Sweden, France ….). HRC420 is covered by an Environmental Product Declaration (EPD). The parent material is based on recycled steel, the coupler material is produced 100% carbon neutral.

HRC420 purchased in this web shop is supplied on rebar B500B and of course delivered with thread protection.

 

Tailormade products:

It is possible to combine HRC420 mechanical couplers bars with other HRC components like HRC120 headed bars couplers or the HRC700 cast-in-connections. HRC also has the possibility to deliver reinforcement bars with HRC420 female in one end and a 90-degree bend or special bend in the other end, as well as reinforcement bars with a HRC420 female in both ends (also U-shaped bars with 2 females). Please contact HRC if you would like a quotation for combinations / tailor made products.

Additional information

Weight
    N/A
Dimensions
    N/A
Rebar diameter
  • 12mm
  • 16mm
  • 20mm
  • 25mm
Product length (mm)
  • 1000mm
  • 1400mm
Products per package
  • 1pcs
  • 25pcs
  • 100pcs
  • 200pcs
SKU: N/A Categories:

ISO 15835

Certified according to ISO 15835-1 “Steels for the reinforcement of concrete-Reinforcement couplers for mechanical splices of bars” for all classes (basic, fatigue, seismic)

CERTIFICATE valid for products made by HRC Europe AS

CERTIFICATE valid for products made by HRC Europe NL BV

ANNEX TO CERTIFICATE

  • Description

    Description

    HRC420 is the female part of the HRC400 ultimate rebar coupler system, combining high capacity, robust design allowing for easy and fast installation at site.

    The high capacity allows for the full transfer of the real strength of the reinforcement (both stress and strain), regardless of the actual strength of the rebar heat. (No reduction in the ductility of the reinforcing steel.)

    Fast and easy installation: The robust, coarse taper threads of HRC400 are designed to withstand rough site conditions. Only a few turns are needed to fully-assemble this self-aligning connection. No torque required for HRC410/420 standard coupler.

    HRC420 is certified acc. ISO 15835 (incl. fatigue and seismic performance) and fulfils European national requirements and specifications (e.g. for The Netherlands, Germany, Denmark, Sweden, France ….). HRC420 is covered by an Environmental Product Declaration (EPD). The parent material is based on recycled steel, the coupler material is produced 100% carbon neutral.

    HRC420 purchased in this web shop is supplied on rebar B500B and of course delivered with thread protection.

     

    Tailormade products:

    It is possible to combine HRC420 mechanical couplers bars with other HRC components like HRC120 headed bars couplers or the HRC700 cast-in-connections. HRC also has the possibility to deliver reinforcement bars with HRC420 female in one end and a 90-degree bend or special bend in the other end, as well as reinforcement bars with a HRC420 female in both ends (also U-shaped bars with 2 females). Please contact HRC if you would like a quotation for combinations / tailor made products.

  • Additional information

    Additional information

    Weight
      N/A
    Dimensions
      N/A
    Rebar diameter
    • 12mm
    • 16mm
    • 20mm
    • 25mm
    Product length (mm)
    • 1000mm
    • 1400mm
    Products per package
    • 1pcs
    • 25pcs
    • 100pcs
    • 200pcs
    SKU: N/A Categories:
  • Reviews
  • Technical data
  • Certifications

    ISO 15835

    Certified according to ISO 15835-1 “Steels for the reinforcement of concrete-Reinforcement couplers for mechanical splices of bars” for all classes (basic, fatigue, seismic)

    CERTIFICATE valid for products made by HRC Europe AS

    CERTIFICATE valid for products made by HRC Europe NL BV

    ANNEX TO CERTIFICATE